TPO Roof Maintenance & Seam Inspection.

A TPO roof fails at its seams and edges, not out in the open middle of the flat rubber surface.

Roofing work by Paramount Roofing in New Mexico

Overview

A TPO roof is the flat, rubber-like sheet on a low-slope roof, and it fails at its seams and edges, not out in the open middle. As the original heat-welds and sealants age, the seams, the metal strips along the edges, and the clamps around pipes are where water gets in. TPO maintenance finds and seals those spots before they open up.

See our full process →

What’s included

What every maintenance visit includes.

Clean and prep

We clean and prep the roof before any sealing work begins.

Coat openings, corners, drains, and wall seams

We coat every pipe opening, corner, scupper (a drain that lets water off the edge of the roof), and wall seam — plus any HVAC ductwork, skylight, and chimney seals — with fibered silicone mastic (a tough, long-lasting sealant), sealing over anything that has failed.

Coat all rooftop edge strips

Termination bars (the metal strips that pin the top edge of the rubber roofing to the wall) are a leading leak point as the sealant ages. We fully coat every one of them.

Inspect and recoat pipe clamps

We inspect and recoat the clamp around every pipe and fitting to restore a tight seal at each one.

Probe and inspect every TPO seam

We probe and inspect every seam where two sheets of TPO overlap for gaps, separation, or spots where the bond has let go.

Repair weakened seams

Any weakened seam is repaired to make the roof surface solid and watertight again.

4.9200+ Google reviewsLicensed, bonded & insured · NM GS-21 #400113Owens Corning Preferred Contractor

“Professional and proficient. We have now used Paramount a couple of times. They are quick to schedule the estimation, which comes with photos and a complete explanation of their findings.”

Bee Gorman · Repeat customer

Upgrade options

Fibered silicone mastic

This service uses fibered silicone mastic as standard — the right material for the heavy sun a TPO roof takes.

Warranty

3-year workmanship warranty on maintenance work.

FAQ

Common questions.

Where does a TPO roof most commonly fail?

At the seams and edges, not out in the open middle. As original heat-welds and sealants age, the overlapping seams, the metal edge strips, and the clamps around pipes are the points where water gets in — which is exactly what this service targets.

What is a termination bar and why does it matter?

The termination bar is the metal strip that pins the top edge of the rubber roofing to the low wall around the roof (the parapet). As the sealant behind it ages, it turns into a leading leak point. We coat every termination bar during the service to re-seal that edge.

What is the difference between a one-time maintenance visit and Paramount Care?

A maintenance visit is a one-time, full-roof service. Paramount Care is the ongoing membership version — annual visits, documented photo reports, and warranty support for your insurer. Commercial plans include 48-hour storm response. You can enroll at the end of any maintenance visit.

See all roofing FAQs

Get a free estimate for your tpo roof.

Get a free estimate Call 505-615-0646